 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TEN 5WI Series, 6 Watt RoHS compliant Features Ultra wide 4:1 Input Range Full SMD-Design High Efficiency up to 84% Extended Operating Temperature Range -40C to +85C pending Indefinite Short-circuit Protection I/O-Isolation 1'500 VDC Input Filter meets EN 55022, Class A and FCC, Level A without external Components Shielded Metal Case with insulated Baseplate 24-pin DIP with Industry Standard Pinout Lead free Design, RoHS compliant 3 Year Product Warranty The TEN 5WI series is a family of dc-dc converter modules with 5 to 6 W output power featuring ultra wide 4:1 input voltage ranges. They come in a compact DIL-24 metal package with industry-standard footprint. A high efficiency up to 84% allows operating temperatures from -40c to 85C at full output power without derating. A built-in EMI input filter complies with EN 55022,classA without need of external components. Further standard features include over voltage protection and continuous short circuit protection. Typical applications for these converters are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. Models Ordercode TEN 5-2410WI TEN 5-2411WI TEN 5-2412WI TEN 5-2413WI TEN 5-2421WI TEN 5-2422WI TEN 5-2423WI TEN 5-4810WI TEN 5-4811WI TEN 5-4812WI TEN 5-4813WI TEN 5-4821WI TEN 5-4822WI TEN 5-4823WI 18 - 75 VDC 9 - 36 VDC Input voltage range Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC Output current max. 1200 mA 1000 mA 500 mA 400 mA 500 mA 250 mA 200 mA 1200 mA 1000 mA 500 mA 400 mA 500 mA 250 mA 200 mA Efficiency typ. 76 % 79 % 84 % 83 % 79 % 84 % 83 % 76 % 79 % 84 % 83 % 79 % 84 % 83 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TEN 5WI Series Input Specifications Input current no load /full load Start-up voltage / under voltage shut down Surge voltage (1 sec. max.) Reverse voltage protection Conducted noise (input) 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. 24 Vin models: 9 VDC / 8.5 VDC typ. 48 Vin models: 18 VDC / 16 VDC typ. 24 Vin models: 50 V max. 48 Vin models: 100 V max. 1.0 A max. EN 55022 level A, FCC part 15, level A 2.0 % max. - Input variation Vin min. to Vin max. 0.3 % max. - Load variation 10 - 100 % single output models: 2.0 % max. dual output models: 2.0 % max. balanced load 3.0 % max. unbalanced load 75 mVpk-pk max 0.02 % / K > 110% of Iout max., constant current indefinite (automatic recovery) 3.3 /5 12 /15 5 12 /15 - Operating - Case temperature - Storage VDC VDC VDC VDC models models models models 1000 F max. 470 F max. 220 F max. (for each output) 100 F max. (for each output) - 40 C ... + 85 C + 100 C max. - 55 C ... + 125 C 3.5% /K above 70C 95 % rel H max. >1 Mio. h @ + 25 C 1'500 VDC 350 pF typ > 1`000 M Ohm 300 kHz typ. (Pulse frequency modulation PFM) UL/cUL 60950 , IEC 60950, EN 60950 Input/Output Input/Output Input/Output (500 VDC) 6 Watt Output Specifications Voltage set accuracy Regulation Ripple and noise (20 MHz Bandwidth) Temperature coefficient Current limitation Short circuit protection Capacitive load General Specifications Temperature ranges Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 E) Isolation voltage Isolation capacity Isolation resistance Switching frequency Safety standards All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 5WI Series Physical Specifications Case material Baseplate material Potting material Weight Soldering temperature Steel, Nickel plated non conductive FR4 Epoxy (UL 94V-0 rated) 17 g (0.49 oz) max. 260 C / 10 sec. 6 Watt Outline Dimensions mm (inches) (0.18 0.02) 0.5 2.54 (0.1) 4.5 32 0.5 (1.25 0.02) 5.08 15.24 (0.6) 22.86 (0.9) Bottom view 23 22 2 3 Pin-Out Pin 2 3 9 11 14 16 22 23 Single -Vin (GND) -Vin (GND) No pin No function +Vout -Vout +Vin (Vcc) +Vin (Vcc) Dual -Vin (GND) -Vin (GND) Common -Vout +Vout Common +Vin (Vcc) +Vin (Vcc) (0.2) 16 14 0.5 2.4 0.5 (0.09 0.02) 9 11 Insulated Baseplate 15.24 (0.6) 20 0.5 (0.8 0.02) (0.02) 3.8 10 0.5 (0.15) (0.4 0.02) Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.5 (0.02) Specifications can be changed without notice Rev. 07/05 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43311 4511 * Fax +41 43311 4545 * info@traco.ch * www.tracopower.com Page 3 of 3 |
Price & Availability of TEN5-2412WI
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |